GAS ANALYSIS CARBOMET

The analyzers CARBOmet are based on NDIR cell.
The basic functions satisfy a lot of applications in industrial, food and medical environments, and include:
- Microprocessor control
- Viewer analysis of 4-digit LED
- 2 set-point fully configurable by the user, with relay output
- Audible alarm
- Linear output 4 ... 20mA
- RS 232 serial output (standard) or RS485 (optional) ModBus RTU
- Programming via three buttons on the front panel
- Calibration Zero and Span adjustable by appropriate commands on your device menu.

Applications
Process monitoring for greenhouse air analysis
Process monitoring for hyperbaric chambers applications
Air monitoring for packaging food applications
Process monitoring for industrial and laboratories

Technical data
Power supply 220 Vac 50 / 60 Hz, P max 10 VA, fuse 0,5 A
Measuring range 0...30 %, 0...100 %, CO2
Visual indication Uscita 4...20 mA - Output 4...20 mA A negativo comune - carico massimo 700 Ohm min. tensione a vuoto 15Vdc
Max. load 700 Ohm open voltage > 15 Vdc negative common configuration
Relay outputs N.O. and N.C., output switch max. voltage 60 Vdc / 220 Vac; max. current 1A
Response time < 60 sec. From 10 to 90 % F.S.
Warm - up time 4 minutes
Combined error < ± 3 % sul F.S. - full range
Long term drift < 1 % of F.S. over 12 months
Correction ambient T ° Thermostated cell at 40°C
Operating Humidity 0 / 99 % Ur Non condensing
Flow range 0,7 - 12 l/min
Pneumatic connections 1/8" F
Housing Aluminum black DIN 43700, dim. 96 x 96 x (p) 169 mm
Serial output RS 232 undirectional - standard, RS 485 bidirectional (optional)
Weight 1.600 gr.
Operating temperature 0...50°C
Reference standars and directives CE

Download

  Datasheet